MD-EraBlack, Male mannequin head
Height: from top to bottom 17"
Circumference: 21"
Color: Black color.
Handsome good looking guy.
Toddler & Child Torso Forms work well for display of 2T-3T and child's 7-9 light to medium weight clothing, although they will accommodate larger clothing depending on the style. Toddler torso has one center hole and child torso has two 7/8" holes in the base for placement on a tabletop stand or an elevated stand. One hole is centered for displaying blouses or dresses; the other is offset (child only) for displaying outfits with pants or shorts. Tabletop stands add stability and are recommended for high traffic areas and permanent table or floor displays. Each torso also has a solid base so that it can stand on its own, and a loop on the neck for hanging.
MEASUREMENTS **** Height (of torso only): 27 1/2 Inches **** Width: 14 1/2 **** Inches from shoulder to shoulder **** Bust: 34 Inches **** Waist: 24 1/2 Inches **** Hips: 29 1/2 Inches **** If you have any questions please contact us .
Measurements: Height of torso only: 33.5 Inches Neck: 13.7" Shoulder to shoulder width: 19.2 Inches Chest/Bust: 34.2 Inches Waist: 25.2 Inches Hips: 35.7 Inches.
Very basic but beautiful dress form is perfect for displaying dresses, suits, pants and pretty much all clothing. This dress form will also work for basic sewing. The actual torso is made of fiberglass and is covered with material and foam. This unit displays dresses and slacks With the added technique underneath the torso you can screw the stand to the side and display slacks or you can screw it on the middle for skirts.
This is a Black Toddler Mannequin Form. It's perfect to show toddler clothing (sizes from 18m to 4T). The mannequin is a half form made of high quality plastic (injection molded) and comes with an adjustable metal base (from 19" up to 38" height). The base for If you don't want to use the metal base, you can hang the mannequin, because the item includes a hook as other mannequins in my storefront.The black color mannequin helps to show light colored garments while the white and flesh tone colors are useful to show dark colored garments - available in my store too).
Male & female mannequins work well for display of men's medium and women's size 5 to 7 light to medium weight clothing, although they will accommodate larger clothing depending on the style. Each torso has two 7/8" holes in the base for placement on a tabletop stand or an elevated stand. One hole is centered for displaying shirts, blouses or dresses; the other is offset for displaying outfits with pants or shorts. Tabletop stands add stability and are recommended for high traffic areas and permanent table or floor displays. Each torso also has a solid base so that it can stand on its own, and a loop on the neck for hanging.
This male mannequin is a full-body dress form showcasing the male physique. The floor-standing fixture includes a tempered glass base and calf rod to keep the unit stable while in use. The male mannequin is made from polyethylene plastic and features a light, flesh tone color and bald head. Detachable limbs make it incredibly easy to dress and undress the form. The head can also be turned left and right to create a unique presentation. This full-body male mannequin has realistic, painted facial features, which make the form more lifelike. Dimensions: Height: 72.5" Chest: 38" Waist: 29.5" Hips: 35.25" Inseam: 33.5" Shoulders: 20" Neck: 13.5" Head: 22" Shoe Size: 8 Weight: 20.5 lbs.
Male inflatable torso forms with arms work well for the display of light to medium weight clothing. The torso has two 7/8" holes in the base for placement on a tabletop stand or an elevated stand, a solid base so that it can stand on its own. One stand hole is centered for displaying shirts; the other is offset for displaying outfits with pants or shorts. Tabletop stands add stability and are recommended for high traffic areas and permanent table or floor displays.
Very basic but beautiful dress form is perfect for displaying dresses, suits, pants and pretty much all clothing. This dress form will also work for basic sewing. The actual torso is made of fiberglass and is covered with material and foam. This unit displays dresses and slacks With the added technique underneath the torso you can screw the stand to the side and display slacks or you can screw it on the middle for skirts.
Accidents Happen! Be prepared with clear Tear-Aid Repair Patches. These peel & stick patches work great for holes in all types of plastic products. Vinyl-Only Repair Kit - Sticks to Vinyl and Vinyl Coated Materials.
Female Head form is great for the display of wigs, hats & jewelry. Use with a tabletop stand for better support and decorative display.
Female mannequin head,
Beautiful makeup, Artistic style, without ears.
Height: from top to bottom 19"
Circumference: 22",
Vintage style
PS: Any other accessories appeared in the pictures are not included.
Color: Chrome
Size:
Bust 39"
Waist 28.5"
Hip 35"
Height 6' 2"
Special designed, egg head male mannequin with arms at sides, and full body chromed, high quality
Including base + foot support + calf support.
1. Due to the delicate chromed object characteristic, there might be some slightly scratches on the surface of the mannequin.
However, we will try our best to make sure the quality of the item that you received.
This is a flesh tone GREAT SELLER'S PACK / SET. It contains TWO (2) Mannequin Forms (Female and Child). They are perfect to show and sell all the children clothes that you want plus woman clothes (dresses, blouses, Bras,T-shirts, jackets, sweaters, vests, tanks and others). The flesh and white color helps to show dark colored garments and the black is for light colored garments - available too.
Constructed in Styrofoam. Great for displaying hats, wigs, scarves, necklaces, sunglasses, goggles, and helmets.
This unique dress form wall decor is handcrafted out of wrought iron. It can be used as a wall basket for towels, etc. It is a three dimensional piece. The design is composed of scroll work and elegant lines. The loops at the top edge can be used to clip pictures, or cards. The finish is a very dark brown. This dress form comes in two pieces and minor assembly is required. Size - 17" tall, 16" wide, 5.5" from front to back.
This is a White Female Mannequin Torso Form. It's perfect to show t-shirts, shirts, jackets, sweaters, vests, tanks and others. The mannequin is a half form made of high quality plastic (injection molded). This mannequin is a new model, so you will not easily find it. Includes a hook for hanging. The white color helps to show dark colored garments (the black is for light colored garments - available too).
Male inflatable mannequins are best for the display of light to medium weight clothing, although they will accommodate larger clothing depending on the style. This mannequin is best used with chrome stands MS1 or MS5. It can be used with the aluminum, adjustable stand MS4; however, you may have to apply additional weight to the base of the stand for added stability. An angled wood adapter is included with all orders for a full-size mannequin and a stand. Stand adapter is attached at the lower back of the form.
This is a Lot of 5 Black Torso Mannequin Forms. They are perfect to show tops, blouses, t-shirts, shirts, bras,Jackets, Jewelry & others. The black color helps to show light colored garments (the white is for dark colored garments - available too).
Size: One size only (small to regular) Total Length: About 39" / 98cm Waist: About 22.8~31.5" / 58~80cm (Elastic) Faux Leather Lace Mesh Inset Stripes ECOSCO Leggings
Made In The USA With All USA Made Parts! It is unique for a few reasons, the most obvious being that it is soft. It is made of high-density foam that allows you to pin into it easily, great for the sewer who uses the draping technique of pattern drafting. Being made of foam means it is ideal for use by corset makers as it can be squeezed and shaped much like the human body. Made of durable, soft polyurethane (also known as foam rubber) Pre-constructed cover/shell included Adjustable to your height for hemming Turns a full 360 degrees Realistic bust with adjustable "bust string" to obtain natural cleavage Several women can use the same form with the use of individual covers Should you change size, simply re-adjust the cover seams to fit your new shape Solutions for long and short waist sewing problems Smooth, non-broken body sewing surface Consumer accepted for 23 years Pre-constructed cover can easily be adjusted to your shape Your personal cover provides accurate measurem ents for flat pattern alterations The cover is zipped onto the pre-shaped body form and becomes your twin because it compresses to fill the shape of the cover Ultra durable - you can hem on it, steam press on it, pin it, drape on it, baste on it, design and tailor on it To select the proper dress form and cover size: Take the measurements over under garments at the fullest part of hip and bust to the closest half-inch. Select your form size according to hip measurement. Then select your cover size according to your bust measurement. The chart applies even if you are short-waist (half-size) or long waist. Find your cover size across from your form size and select below. Form SizeHip Meas.Waist Meas.Cover SizeBust MeasurementSmall34" to 38"24" to 31"4 5 634" to 36" 36" to 38" 381/2" to 40" Additional Images
Female fully featured molded hard plastic torso. Works well for the display of a variety of women's clothing. Sturdy, durable and flexible. Front half molded form with open back.
These are TWO (2) Dress Mannequin Forms (Black and Flesh Tone). They are perfect to show dresses, tops, blouses, bras and others.These female forms has a gap between the legs, which allows to better display swimsuits, underwear as well as skirts and others because of the leg portion it has.If you are looking for a mannequin form, choose the display form where you will have a wider range of use. The Flesh Tone is useful for neutral colors while the white color helps to show dark colored garments and the black is for light colored garments - available too.Whether you are selling clothes on Amazon or own a store, having both colors of mannequin forms will let you see with which your clothes will look more attractive and neat for your customers.
BRAND NEW - 16" Articulated / Jointed / Poseable - HUMAN ARTIST MODEL - DRAWING MANNEQUIN with STAND!
This is a staple in any artist's collection. The model is used for study of the human body and the basic shapes in its design help artists to capture all the correct scale and shadows for their drawings and artwork!
This Model is 16" Tall and includes a STAND to keep your model standing tall in any variety of positions, from running to jump, standing straight up or sitting in a chair.
Fully articulated joints allow for any pose you can imagine.
Great for beginners or advanced artists!
* paper shown for scale (not included)
Constructed in Styrofoam. Great for displaying hats, wigs, scarves, necklaces, sunglasses, goggles, and helmets.
Very basic but beautiful dress form is perfect for displaying dresses, suits, pants and pretty much all clothing. This dress form will also work for basic sewing. The actual torso is made of fiberglass and is covered with material and foam. This unit displays dresses and slacks as well With the added technique underneath the torso (See Picture) you can screw the stand to the side and display slacks or you can screw it on the middle for skirts.
Comes with free tool set (Awl, Tracing Wheel and Pattern Punch)
This inflatable Small Elephant is 2 feet Tall and 2 1/2 feet Long and is great for party and event decorations and props, trade show and window displays, advertising and marketing, and other creative productions. Deflated, it can easily be packed for storage.
JF-33M01+BS-01
Male Shirt Form
Measurements:
Chest 40"
Waist 35.5"
Crossshoulder 19"
Height 29"
Male white Form with Natural Wooden Base, Flat Top.
Male Hard Foam Dress Form
(We do not sale form alone.)
This inflatable Pteranodon has a 5 foot wingspan and is great for party and event decorations and props, trade show and window displays, advertising and marketing, and other creative productions. Deflated, it can easily be packed for storage.
Very basic but beautiful dress form is perfect for displaying dresses, suits, pants and pretty much all clothing. This dress form will also work for basic sewing. The actual torso is made of fiberglass and is covered with material and foam. This unit displays dresses and slacks With the added technique underneath the torso you can screw the stand to the side and display slacks or you can screw it on the middle for skirts. Look at our other listings for more
Denim print, not real jeans Made of Polyester and Lycra Size: One size only (small to regular) Total Length: About 34.5" / 88cm Waist: About 24 - 37" / 60 - 95cm Hips:About 28 - 39" / 70 - 100cm ECOSCO Leggings
The classic "4-way" rack. In Chrome
White Male Mannequin Torso
With nice figure and arms.
Fiberglass material.
Steel base included.
Body height: 37"
Bust: 39"
Waist: 32"
Hip: 39"
Total height: up to 6'
Matte White Color.
Including base.
This Self-Standing Female Mannequin Leg can be used in many ways, including for hosiery and lingerie.
This is a Black Female Mannequin Torso Form (long up to the waist). It's perfect to show t-shirts, shirts, jackets, sweaters, vests, tanks and others. The mannequin is a half form made of high quality plastic (injection molded) and comes with an adjustable metal base (from 19" up to 38" height). If you don't want to use the metal base, you can hang the mannequin, because the item includes a hook as other mannequins in my storefront. I also have this versatile mannequin in white and flesh tone colors in my store.
3 years old Baby,With Flat Metal Top and head
Measurements:
Bust 19"
Waist 18"
Hip 20"
Height 37"
High quality jersey covered flexible foam .
Children form, strait pinnable.
Nickel round metal base included.
Any clothes or accessories appear on the pictures are not included.
The plastic bellows foot pump works well for inflation of small inflatable products.
This is a black Male Mannequin Torso Form. It's perfect to show t-shirts, shirts, jackets, sweaters, vests, tanks and others. The black color helps to show light colored garments (the white is for dark colored garments - available too).
Our adjustable polished chrome dress form stand has an 8" round base. The stand adjusts from 39 to 62 inches in height at hook level. The upright is threaded for easy removal from the base. This stand weighs 4.8 lbs. The adjustable stand is recommended for use with clothing that requires a specific height for display such as floor length dresses. Designed to support up to 3 lbs. Our MS10RT Mannequin Stand, although operable for other purposes, is best used with our lightweight hard plastic mannequin forms such as: Hard Plastic Upper Torso Forms, Hard Plastic Standard Torso Forms, Hard Plastic Panty/Brief Forms, and Hard Plastic Child, Teen, and Adult 3/4 Forms. Warranty and return claims will be void if stand is damaged when used for other purposes than our lightweight hard plastic mannequin forms.
Constructed in Styrofoam. Great for displaying hats, wigs, scarves, necklaces, sunglasses, goggles, and helmets.
Customize your dress form with this fresh new cover. Great for expression, color schemes, and repair. We have the largest selection of dressforms and mannequins - if you have any questions, please contact us!
This is a White Male and Female Mannequin Torso (long up to the waist) Forms Set. They are perfect to show t-shirts, shirts, jackets, sweaters, vests, tanks and others. These mannequins are half forms made of high quality plastic (injection molded) and comes with 2 adjustable metal bases (from 19" up to 38" height). . If you don't want to use the metal base, you can hang the mannequins, because the items includes a hook as other mannequins in my storefront. The white and Flesh tone colors help to show dark colored garments (the black is for light colored garments - available too).
Printed with Great Britain country flag Unique and fashionable Perfect gift for patriots Size: One size only (small to regular) Total Length: 34.6" / 88cm ECOSCO Leggings(With one Keychain,random style as shown in picture)
The plastic support stand is designed for use with any of our styrofoam head forms.
0 comments: